使用DUL挖数据文件恢复非数据外对象方法

联系:手机/微信(+86 17813235971) QQ(107644445)

标题:使用DUL挖数据文件恢复非数据外对象方法

作者:惜分飞©版权所有[未经本人同意,不得以任何形式转载,否则有进一步追究法律责任的权利.]

在dul进行数据库挖掘恢复的时候,我们可以通过unload table/user等方式来恢复表数据,但是对于一些view,index,trigger,source,seq,Dblink等不能直接通过unload来实现,但是可以通过挖基表来实现相关操作,这里提供了一些处理思路,在实际操作中根据需求,分析数据字典灵活应用
一.view
导出对象

USER$
OBJ$
COL$
VIEW$

执行sql语句

Set pages 10000
Set long 1000
Spool d:\create_view.sql
select
  'CREATE OR REPLACE VIEW '||O.NAME||' ('||
   replace(c.cols,',',','||chr(10))||')'||CHR(10)||
  'as'||chr(10), v.text
from
user$ u, obj$ o, view$ v,
( SELECT COL.OBJ#, COL.COLS
  FROM
  (SELECT
    OBJ#, COL#, substr(SYS_CONNECT_BY_PATH(NAME,','),2) COLS
  FROM COL$
  WHERE COL# > 0
  START WITH COL# = 1
  CONNECT BY PRIOR OBJ# = OBJ# AND PRIOR COL# = COL# - 1 ) COL,
  (SELECT OBJ#, COUNT(*) COLCNT FROM COL$
  WHERE COL# > 0 GROUP BY OBJ#) CN
  WHERE COL.OBJ# = CN.OBJ# AND COL.COL# = CN.COLCNT
) C
where u.user#=o.owner# and o.obj# = c.obj#
  and v.obj# = o.obj# and u.name=upper('&username');

说明
1) 分布执行,不能放置一个脚本文件中执行
2) 每条as后面的select语句可能需要重新格式化
3) Create view 语句最后需要增加”;”

二.source
导出对象

USER$
SOURCE$
OBJ$

执行sql语句

Set pages 10000
Set long 1000
set linse 1000
Spool d:\create_source.sql
SELECT DECODE(S.LINE,1,'CREATE OR REPLACE ','')||SOURCE SOURCE
FROM
  USER$ U, OBJ$  O, SOURCE$ S
WHERE
  U.USER# = O.OWNER# AND
  O.OBJ# = S.OBJ# AND
  U.NAME = UPPER('&username')
  -- AND O.NAME = UPPER('&SOURCE_NAME')
ORDER BY S.OBJ#, S.LINE;

说明
1) 注意SOURCE中的用户名,如果导入不是相同用户,需要修改该脚本用户名
2) 修改完用户名后,直接执行生成脚本即可

三.Index
导出对象

USER$
OBJ$
COL$
IND$
ICOL$

执行sql

Set pages 10000
Set long 1000
set linse 1000
Spool d:\create_index.sql
SELECT
  'CREATE '||decode(bitand(IDX.property, 1), 1, 'UNIQUE', '')||
  ' INDEX '||I.NAME||' ON '||T.NAME||'('||IDX.PATH||');' INDEX_DDL
FROM
  USER$ U, OBJ$  T, OBJ$ I,
  (
    select I.PROPERTY, I.BO#, I.OBJ#, C.POS#,
            SUBSTR(sys_connect_by_path(CN.NAME,','),2) path
    from IND$ I, ICOL$ C, COL$ CN
    WHERE I.OBJ# = C.OBJ# AND I.BO# = C.BO#
      AND I.BO# = CN.OBJ# AND C.COL# = CN.INTCOL#
    start with C.POS#=1
    connect by PRIOR I.OBJ# = I.OBJ#
            AND prior C.POS# = C.POS# - 1 ) IDX,
  (SELECT I.BO#, I.OBJ#, COUNT(*) COLCNT
    FROM ICOL$ I GROUP BY I.BO#, I.OBJ#) IDXC
WHERE
  U.USER# = T.OWNER# AND
  IDX.BO# = T.OBJ# AND
  IDX.OBJ# = I.OBJ# AND
  IDX.BO# =  IDXC.BO# AND
  IDX.OBJ# = IDXC.OBJ# AND
  IDX.POS# = IDXC.COLCNT AND
  U.NAME = upper('&username')
ORDER BY T.NAME, I.NAME;

说明
1) 因为SYS_CONNECT_BY_PATH所以需要10g及其以上版本
2) SQL中没有分区唯一性索引
3) 注意检查sql是否因为行长度不够导致异常

四.Sequence
导出对象

USER$
OBJ$
SEQ$

执行sql语句

Set pages 10000
Set long 1000
set linse 1000
Spool d:\create_sequence.sql
SELECT
  'CREATE SEQUENCE '|| SEQ_NAME ||
  ' MINVALUE '||minval ||
  ' MAXVALUE '||MAXVAL ||
  ' START WITH '||LASTVAL ||
  ' ' || CYC || ' ' || ORD ||
  DECODE(SIGN(CACHE), 1,' CACHE '|| CACHE, 'NOCACHE') ||
  ';' SEQ_DDL
from
  (select u.name OWNER, o.name SEQ_NAME,
      s.minvalue MINVAL, s.maxvalue MAXVAL,
      s.increment$ INC,
      decode (s.cycle#, 0, 'NOCYCLE', 1, 'CYCLE ') CYC,
      decode (s.order$, 0, 'NOORDER', 1, 'ORDER') ORD,
      s.cache, s.highwater LASTVAL
  from seq$ s, obj$ o, user$ u
  where u.user# = o.owner#
    and o.obj# = s.obj#
and u.name=upper('&username'));

五.TRIGGER
导出对象

OBJ$
USER$
TRIGGER$

执行sql语句

Set pages 10000
Set long 1000
set linse 1000
Spool d:\create_trigger.sql
select
   'CREATE OR REPLACE TRIGGER '|| trigger_name || chr(10)||
   decode( substr( trigger_type, 1, 1 ),
           'A', 'AFTER ', 'B', 'BEFORE ', 'I',
           'INSTEAD OF ' ) ||
   triggering_event || ' ON ' || table_owner || '.' ||
   table_name || chr(10) || REF_CLAUSE || chr(10) ||
   decode( instr( trigger_type, 'EACH ROW' ), 0, null,
           'FOR EACH ROW' ), trigger_body
from  (
   select trigusr.name owner, trigobj.name trigger_name,
      decode(t.type#, 0, 'BEFORE STATEMENT',
           1, 'BEFORE EACH ROW',   2, 'AFTER STATEMENT',
           3, 'AFTER EACH ROW',    4, 'INSTEAD OF',
           'UNDEFINED') trigger_type,
   decode(t.insert$*100 + t.update$*10 + t.delete$,
           100, 'INSERT', 010, 'UPDATE', 001, 'DELETE',
           110, 'INSERT OR UPDATE', 101, 'INSERT OR DELETE',
           011, 'UPDATE OR DELETE',
           111, 'INSERT OR UPDATE OR DELETE',
           'ERROR') triggering_event,
   tabusr.name table_owner, tabobj.name table_name,
   'REFERENCING NEW AS '||t.refnewname||' OLD AS '||t.refoldname REF_CLAUSE,
   t.whenclause,decode(t.enabled, 0, 'DISABLED', 1, 'ENABLED', 'ERROR') STATUS,
   t.definition , t.action# trigger_body
   from obj$ trigobj, obj$ tabobj, trigger$ t,
        user$ tabusr, user$ trigusr
   where (trigobj.obj#   = t.obj# and
       tabobj.obj#    = t.baseobject and
       tabobj.owner#  = tabusr.user# and
       trigobj.owner# = trigusr.user# and
       bitand(t.property, 63)     < 8 ))
where table_owner=upper('&username')
order by owner, trigger_name;

六. Dblink
导出对象

Sys.link$
sys.user$

执行查询sql

SELECT 'CREATE '||DECODE(U.NAME,'PUBLIC','public ')||'DATABASE LINK '||CHR(10)
||DECODE(U.NAME,'PUBLIC',Null, 'SYS','',U.NAME||'.')|| L.NAME||chr(10)
||'CONNECT TO ' || L.USERID || ' IDENTIFIED BY "'||L.PASSWORD||'" USING
'''||L.HOST||''''
||chr(10)||';' TEXT
FROM SYS.LINK$ L, SYS.USER$ U
WHERE L.OWNER# = U.USER#;